$460.00

ICOM UHF TRANSCEIVER/400-470MHz

The IC-F4161 series Handheld Transceiver is the UHF version of the IC-F3061 series Transceiver, using a frequency of 400-470MHz or 450-520MHz.

Basic LTR®/Conventional mixed mode operation

The IC-F3061 series provides LTR®/conventional mixed mode operation. Group, selective (DTMF), and phone call are available in LTR® mode.

IP54/55 Dust-protection and splash, water jet resistance

The IC-F3061 series meets IP54/55 requirements for dust-protection, splash and water jet resistance. Its durable construction is backed up by the aluminum
die cast chassis and polycarbonate casing, allowing reliable operation under harsh weather and environmental conditions.

Lithium-Ion battery pack

Supplied 2000mAh Li-Ion battery pack, BP-232, provides 14 hours* of operating time. Icom’s rugged dual-rail guide securely locks the battery to the radio. Optional battery case BP-240 provides a convenient back up and great reassurance in an emergency.
* Typical operation Tx:Rx:Stand-by=5:5:90, power save on

Most popular signaling built-in

The IC-F3061 series has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities as standard for group communication or selective calling. 40 pairs of CTCSS/ DTCS memory channels are programmable independent of the operating channels. Also, the IC-F3061 series can decode ten 2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is received, the following actions are programmable for each code:
  • Beep sound
  • Bell icon
  • Auto TX
  • Answer back call
  • Stun/kill radio
  • Scan
Wide frequency range and large channel capacity

The IC-F3061 series covers a wide frequency range in one version (VHF 136–174 MHz, UHF 400–470 MHz or 450–520 MHz). The 512 memory channel capacity with 128 zones allows you to divide and store a variety of flexible channel groupings. Memory channel selection can be made with a simple rotation of the rotary channel knob. Wide and narrow channel bandwidth (25/12.5kHz, 30/15kHz) is also programmable.

Full dot-matrix LCD

Using a large full dot-matrix LCD
(32 × 18 mm), the IC-F3061 series shows upper and lower case characters clearly. The display setting is selectable from 1 line, 12 characters or 2 lines 24 characters via programming. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Enhanced audio

The IC-F3061 series employs a BTL amplifier that increases the audio output and the built-in audio compander provides clear, low noise communications.

Voting mode scanning

The Voting mode scanning detects the S-meter level of repeater stations and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. In addition, the IC-F3061 series has 10 scanning modes including priority scan and double priority scan.

Built-in inversion-type voice scrambler

The built-in inversion type voice scrambler provides secure conversation as standard. When a more secure system is required, the 32 code non-rolling-type voice scrambler UT-109R and 1020 code rolling type UT-110R are available as an option.

Other features:
  • 8 DTMF autodial memories
  • 2 step reduced power setting
  • Power on password
  • Busy, repeater lockout functions
  • Radio stun and kill functions disable a lost or stolen unit over the air
  • Surveillance function temporarily turns off the LED backlight and beep sound
  • Powerful 5W output both VHF and UHF and more...
  • Flash CPU for future upgrade and more...