Dynon EFIS-D10A EAA Sales Kit Electronic Flight Information System


Give Your Plane a Great Attitude with the EFIS-D10A Electronic Flight Information System by Dynon Avionics--STC

SAVE SPACE, WEIGHT, TIME & MONEY! - Your instrument panel is one of the largest investments you're likely to make. Considerable money and space savings can be realized when selecting the EFIS-D10A system. This compact design optimally replaces 10 flight instruments plus your altitude encoder all in one easy to install packaged system. Not only do you free up valuable panel space, but significantly save on installation time and complexity.

EASY TO INSTALL - This highly integrated instrument design makes installation far simpler than all of the separate traditional gauges it replaces.

ENHANCED RELIABILITY - The solid-state design uses no moving parts, inherently making it more reliable than traditional mechanical gyros and vacuum systems. It's a favorite among aerobatic pilots whose maneuvers cannot harm the instrument.

INTRODUCTION - The EFIS-D10A Electronic Flight Information System provides a solid-state solution for the ten most important instruments you need. The flight data are all ergonomically arranged onto a single, bright sunlight readable, color liquid crystal display to optimize functionality and panel space.

INSTRUMENTS INCLUDED - Attitude Indicator, Airspeed Indicator, Altimeter, Vertical Speed Indicator, Gyro-Stabilized Compass Heading, Turn Coordinator/Ball, Turn Rate, Clock/Timer, G-Meter, Voltmeter, Angle-of-Attack (with optional Dynon AOA pitot), Serial altitude encoder output to your transponder Battery Backup and Antenna, STC from EAA

ALL SENSORS INSIDE - The EFIS-D10A instrument includes 15 solid-state sensors all inside the instrument housing eliminating any complicated installation problems. These sensors include accelerometers, pressure transducers, temperature sensors, gyros, and magnetometers. If desired, an optional external compass/magnetometer and outside air temperature probe may be added to your system.



Mounting: Fits into standard 3 1/8" panel hole Optional flush mount bracket available

Weight: 1 lb. 9 oz. (700 grams) 1 lb. 15 oz. with internal battery option (880 grams)


Operating Temperature: -220 to 1220 F (-300 to 500 C)


Voltage: 10 - 30 Vdc

Current: 8 Watts normal operation 20 Watts (max) if optional internal battery is charging


Wiring: D-25 pin male connector

Plumbing: 1/8" NPT (female) each for airspeed, static and angle of attack


Type: AMLCD, TFT (Thin Film Transistor)

Backlight: 450 NIT

Size: 3.8" diagonal (96 mm) Resolution: 320 x 240 color pixels

User Interface

Menu: Softkey menus

Buttons: 6Power On/Off: Furthest left button Momentary press to turn on Hold for 2 seconds to turn off

Measurement Parameters

Airspeed: 30 - 325 knots indicated (35 - 374 mph)

Altitude: -1200 to 30,000 Feet (-366 to 9144 M)

Attitude: Fully aerobatic, 1500 /second roll, pitch and yaw. (Exceeding 1500 /sec is not harmful to instrument)

G-meter: -10G's to +10G's

Voltmeter: 10 to 30 Vdc

OAT: -400 to 1400 F (-400 to 600 C)

Timer: 10 Hour Up 10 Hour Down